Introduction of LED light strip production process
Date:2011-06-09 11:26
Status:Be resolved
Question:admin
ith or without reverse), posted with no offset, with or without short-circuit, resistor is correct and so on.
4, reflow soldering (M6/S6). It should be noted that the return temperature must be controlled well, not too low melting solder paste, there will be cold welding; too high, easy blistering FPC. There is preheating temperature should be appropriate, too low volatile flux incomplete residue after reflow, affecting the appearance; too high will cause premature evaporated flux, resulting in
Best answer:
No best answer
[All answers(0)]
[Let me answer]
17/19 Next Pre Home page Last page
Back
Refresh
WAP Home
Web version
Login
06/25 13:40